RPZ backflow testing is required every year for reduced pressure zone assemblies, the devices Columbus relies on to protect the water supply at its highest-hazard connections. Because an RPZ guards against contamination from chemicals, process water or other dangerous sources, it has to be tested by a certified, city-approved tester using calibrated equipment.
What Is an RPZ Backflow Preventer?
A reduced pressure zone assembly has two independent check valves with a relief valve between them. If either check valve leaks or pressure drops on the supply side, the relief valve opens and dumps water to the outside instead of letting it flow backward. That design makes the RPZ the strongest standard backflow device.
Where RPZ Assemblies Are Used
- Medical, dental and laboratory buildings
- Restaurants, car washes and buildings with chemical dispensers
- Boilers, cooling towers and industrial process lines
- Irrigation systems that inject fertilizer
- Main service lines on many commercial properties
How an RPZ Test Works
The tester attaches a differential pressure gauge to the test cocks and checks three things: that the first check valve holds the required pressure difference, that the relief valve opens at the correct point, and that the second check valve holds tight. The results are recorded and filed online with the Columbus Backflow Compliance Office.
Signs Your RPZ Needs Attention
- Water dripping or discharging from the relief valve
- A sudden drop in water pressure downstream
- Freeze damage or visible cracks on the body
Discharge from the relief valve is the device doing its job, but it usually means something inside needs a backflow repair. Do not plug the relief port, since that defeats the protection.
Schedule RPZ Testing in Columbus
For buildings with several devices, see commercial backflow testing. To book, use the quote form or call (614) 504-3373 for RPZ backflow testing.